Search Other Blog

Showing posts with label USB. Show all posts
Showing posts with label USB. Show all posts

12Volt from USB port Using LT1618

Using this circuit we can catechumen 5V DC from the computer USB anchorage to 12V DC and a circuit like this will acquisition a lot of appliance in USB powered systems. The affection of this circuit is IC LT1618 which is a connected current, connected voltage addition converter. The IC has a advanced ascribe voltage ambit of 1.8 to 18V DC and achievement voltage can be up to 35V DC. 

In the circuit resistors R1, R2 sets the achievement voltage. Pin amount 9 is the abeyance pin, beneath than 0.3V to this pin will shut down the IC. Pin amount four is the accepted faculty acclimatize pin. The accepted faculty voltage can be bargain by applying a DC voltage to this pin. If this acclimation is not bare affix this pin to arena and you can omit apparatus R3, R5 and Q1.
READ MORE - 12Volt from USB port Using LT1618

USB sound card with PCM 2702

USB sound card with PCM 2702USB sound card with PCM 2702
Designing and building a USB sound card longer a head ache got the PCM 2702 integrated circuit from Texas Instruments. The PCM2702 is an integrated bit digital to analog converter that has digital to analog output channels. The integrated interface controller of PCM2702 is compliant to the USB .0 standards. The IC handle sampling rates of KHz, 44.1 KHz and KHz. The IC of helpful like on-chip clock generator, digital attenuator, play back flag, suspend flag, zero flag, mute etc. is that this circuit is plug & play and doesn’t any driver software for Windows XP and Windows Vista operating systems.

The circuit gets and audio from the USB through the D+ and D- pins of the PCM2702 all transferring is at full speed. The decoded audio signals at the VOUTL and VOUTR pins of the IC. The 12MHz crystal is connected between the XT0 and XT1 pins of the IC. The VBUS (USB bus power) pin and DGND (digital ground) pins of the IC are connected to the +5V and ground pins of the USB respectively. The circuit +5V DC and +3.3V DC for operation and voltages derived from the USB port using LDO (low drop out) voltage regulators (not shown in circuit).
READ MORE - USB sound card with PCM 2702